Table of Contents
Advertisement
4. Open the Telephony: Extended: Companies menu page.
Click on the headline of the company desired (default:
"Company 1").
5. Under the PIN dial header, select the desired Route. Select
the user group created by the previous steps for the User
group setting. Confirm with Apply.
You can also use the "Standard" user group or the "External
trunk" standard route for the "PIN Code Telephony" feature. If you
configure a special route, you must also enter a seizure code for
this route (Telephony: Trunks: Route menu, setting: Code).
Activate the PIN dial user group option for all terminals which are
to have the "PIN Code Telephony" feature available to them. This
can also be the "Guests" user group. Furthermore, you can also
use the "PIN Code Telephony" feature for users who have no ter-
minal assigned to them ("virtual users").
Implementation
You would like to use the "PIN Code Telephony" feature from any
telephone. To do so, the telephone belonging to another user is
switched to your personal user account ("identity change"). Carry
out the following steps:
1. Call the main menu on a system telephone. Select the
6 Connections
number and your user PIN. If the entry is correct,
now appears. Now select the desired external call
dialling>
number including the seizure route for the "External Trunk"
standard route.
You can also initiate PIN dialling with a code procedure:
H # 4 6 Z
The route configured for the "PIN Code Telephony" feature is
used to make a call in that the seizure code for the standard
route is also replaced by another seizure code if applicable.
Furthermore, the authorisations are activated for the user
group designated for the "PIN Code Telephony" feature.
2. Make your call. Please note that the call number identity being
used is displayed to the external caller even when you are
:
7 PIN dialling
(your no.)
* Z
PIN Code Telephony
menu entry. Enter your call
(user PIN)
# Z
<PIN
(external no.)
Telephony
177
Advertisement
Table of Contents
