Features - BELGACOM Forum 523 Mounting And Commissioning Manual

Belgacom forum ip phone mounting and commissioning manual
Hide thumbs Also See for Forum 523:
Table of Contents

Advertisement

142
Properties
Note: You can simultaneously use older and newer DECT over IP
base stations. In this case you have to select a newer
DECT over IP base station Forum Base DECT IP v2 as
DECT over IP Manager.
If VoIP telephony is already being used, Ethernet cable access
makes good sense. Transmission of telephony signalling and voice
data via TCP/IP also offers usage of existing network infrastruc-
ture and an increase in range using suitable methods. VPN con-
nections, for example, can be used for data links to provide serv-
ice to remote or hard-to-reach locations.
Note: The DECT base stations Forum Base DECT IP indoor (v1 &
v2), Forum Base DECT IP outdoor (v1 & v2) and Forum Base
DECT IP-WLAN indoor (v1 & v2) support the DECT encryption
function. This feature is however, only available if all the DECT
base stations support it.

Features

All DECT over IP base stations can be connected to a CAT5 Ether-
net cable with a 10/100 Base T. Power is supplied either via
Power-over-LAN (IEEE 802.3af) or via an additional power supply
unit. A base station of the type Forum Base DECT IP outdoor can
only be supplied via PoE.
Please note: The WLAN function of the Forum Base DECT IP-
WLAN indoor is activated only when connected to the 100 Base T.
DECT terminals offer all system telephony features. DECT tele-
phones supporting the GAP standard can also be operated. Trans-
parent GAP device handovers are supported. DECT encryption of
calls can be deactivated for the Forum Base DECT IP (v1 & v2) if
desired.
VoIP audio communication between the DECT over IP base station
and the Forum 523/524 is made via the RTP/RTCP protocol. RTP
®
DECT over IP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forum 524

Table of Contents