Table of Contents
Advertisement
Configuring the Multi-
Company Variant
The multi-company variant can be commissioned and configured
by the system administrator of the Forum 523/524 without any
major effort. In the multi-company variant, the communications
system behaves in exactly the same way as the single-company
variant. This is particularly of interest to users who want to
expand their own system and at the same time operate it in a
group.
The process in brief:
1. The feature must be activated (see Activating the Multi-
Company Variant starting on page 198).
2. The required companies must be set up (see Configuring and
Managing Companies starting on page 198).
3. The users of the Forum 523/524 are assigned to the individual
companies (see Assigning Users starting on page 199).
4. In order that the Forum 523/524 can transfer incoming calls to
the corresponding company (or its staff) correctly, the existing
bundles must be uniquely assigned to the companies (see
Assigning a Bundle/SIP Trunk starting on page 199).
5. In the case of outgoing external calls, the lines via which the
members of a company can make a call must be defined (see
Allocating Routing Codes starting on page 200).
6. An exchange must be set up for each company so that the
Forum 523/524 can correctly process statuses in which a call
should be routed to the exchange (see Configuring the
Company Exchange starting on page 200).
Configuring the Multi-Company Variant
Multi-Company Variant
197
Advertisement
Table of Contents
