Table of Contents
Advertisement
4. Click on the user group for the user who is to execute the
"Switch authorisation" feature. Activate the Switch
authorisation option. Confirm with Apply.
5. Open the Telephony: Extended: Companies menu page.
Click on the header of the company desired (default:
"Company 1").
6. Under the Switch authorisation header, select the User
group temporarily active due to switching (e. g. "Guest
external seizure"). Activate the Notify at end of call option
as desired. Confirm with Apply.
Devices to be switched ("guest telephones") are generally config-
ured in a user group without external authorisation. If desired,
you can decline to assign these terminals to a user. In this case,
the "Guests" user group is automatically assigned.
Implementation
A hotel guest would like to make an external call. You fulfil this
wish with the following steps:
1. Call the main menu on your system terminal. Select the
6 Connections: 6 Switch auth.
call number of the terminal where a temporary authorisation
switch is to take place. Confirm with the
option and confirm with the
If the terminal to be switched is currently in the call state, the
authorisation switch only takes place once the call is finished.
2. The next outgoing call on the switched terminal then is made
with the changed authorisations. If, e. g. the Immediate
External line seizure option was activated to do so, the
external dialling tone is audible and an external call can be
made without entering a code.
If the next outgoing call is not made within 60 seconds, the
authorisation switch expires automatically.
At the end of the call – when configured in this way – you receive
a brief message regarding the call duration and the relevant
charges incurred.
Switch authorisation
option. Enter the internal
OK
key.
OK
key. Select the
On
Telephony
179
Advertisement
Table of Contents
