Table of Contents
Advertisement
Mounting Location
The ambient temperature for operating the Forum 523/524 must
be between +5 °C and +40 °C. The power supply must be 230 V/
50 Hz AC and using a separate fuse for the power supply is rec-
ommended.
To maintain the prescribed ambient temperature, mount the
Forum 523/524 in a well-ventilated location away from direct
sources of heat.
Mount the Forum 523/524 on a wall, but:
not in front of or above heat sources such as radiators,
not in places subject to direct sunlight,
not behind curtains,
not in small, unventilated, damp rooms,
not on or near inflammable materials
and not near high-frequency devices such as transmitters, x-
ray equipment or any similar devices.
Connect the device to a separate 230 V power circuit and install a
mains overload filter.
Mounting Location
Installation
35
Advertisement
Table of Contents
