Table of Contents
Advertisement
48
Port Assignment, Termination, Cable Length
Port Assignment,
Termination, Cable Length
S
Ports
0
All S
ports can be externally connected (i. e. on ISDN network
0
terminations). The S
installed interface cards can also be internally connected. Simulta-
neous use of one S
ble.
Whether you use switchable S
munication will depend on your individual communication require-
ments and the existing basic connections.
Please note that the S
of 100 ohms at each end.
Check: Is the terminating resistor switched on in the NTBA?
Forum 523/524's software is used to switch on the terminating
resistor. You can adjust this setting when configuring the S
in the Configurator on the Web console.
Installation
2 port and all S
0
port as internal and external port is not possi-
0
ports for internal or external com-
0
buses each require a terminating resistor
0
ports on additionally
0
ports
0
Advertisement
Table of Contents
