Program 610 - Mix & Match Description Programming - Sam4s ER-420 Series Operation And Program Manual

Program 610 - Mix & Match Description Programming
Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To descript by three digit alpha character codes you must select
'No' in system option #25(See "System Option Programming").
ER420 Series
1. Turn the control lock to the P position.
2. To begin the program, enter 6 1 0, press the SBTL key.
6 1 0
3. Enter the number of the M&M table you wish to program; press the X/TIME
key.
X/TIME
4. If you are programming using alpha overlay;
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
5. Press the CASH key to finalise the program.
CASH
SBTL
X/TIME
SBTL
Program Mode Programming • 143