Program 610 - Mix & Match Descriptor Programming - Sam4s ER-5200M Operator's And Programming Manual

Program 610 – Mix & Match Descriptor Programming
Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To enter descriptors by three digit alpha character codes you must
add a value of '1' to system option #25 (See "System Option Programming" on page 112).
150 • P-Mode Programming
1. Turn the control lock to the P position.
2. To begin the program, enter 6 1 0, press the SBTL key.
6 1 0
3. Enter the number (1-10) of the M&M table you wish to program; press the X/TIME key.
X/TIME
4. If you are programming using an alpha keyboard overlay, type up to 18 descriptors on
the overlay and press the SBTL key.
Type up to 18
descriptor keys
If you are programming using descriptor codes, enter up to 18 three-character codes and
press the SBTL key.
Enter up to 18 three-
character codes
5. Press the CASH key to finalize the program.
CASH
SBTL
SBTL
SBTL
ER-5200M/5240M Electronic Cash Register