Sis Command And Response Table For Matrix Switcher Commands - Extron electronics XTP CrossPoint 1600 Setup Manual

SIS Command and Response Table for Matrix Switcher Commands

Command
Create ties
•
NOTES: Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*24$.
•
The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
•
The & tie command for RGB and the % tie command for video can be used interchangeably, as can the & read tie command for RGB
and the % read tie command for video.
•
Audio breakaway command functions are dependent on the audio routing selections of the inputs and outputs.
X!
Tie input video and audio to
X@
output
Example:
X! X@
, R GBHV
Tie input to output
Example (see Notes, above):
X! X@
Tie input to output , video
Example (see Notes, above):
X! X@
Tie input to output , audio
Example (see Notes, above):
X!
Tie input to all outputs
Quick multiple tie
Read output tie
NOTE: • = Space
X!
= Input number
X@
= Output number
Command
Input video format (available for inputs on an XTP CP 4i VGA universal analog input board only)
Set format
Example:
View format
Auto-Image (available for inputs on an XTP CP 4i VGA universal analog input board only)
Execute an auto image
Color (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Color adjustments are available for RBGcvS (SCART), interlaced component video (YUVi), S-video, and NTSC composite video inputs.
Set a specific color value
Increment color value
Decrement color value
View the color value
X!
NOTE: = Input number
Y#
= Set input video format
Y$
= Detected video format
X%
= Picture adjustments
SIS Command Response
(Host to Unit) (Unit to Host)
X! X@ X@
* ! Out
•
1*3!
Out03 In01
•
X! X@ X@
* & Out
•
10*4&
Out04 In10
•
X! X@ X@
* % Out
•
7*5%
Out05 In07
•
X! X@ X@
* $ Out
•
24*04$
Out04
In24
•
X! X!
*! In All
E Y! Y@ Y! Y@ }
+Q * ! * $
...
]
Qik
X@ X!]
&
00 – 16 or 32 (00 = untied)
01 – 16 or 32
SIS Command Response
(Host to Unit) (Unit to Host)
X! Y# X!
* \ Ityp *
1*0\ Ityp1*0*5
X! Y# Y$]
\ *
X! X!]
A Aadj
E I X! * X% COLR } ColrI X!
E X! } X!
I +COLR ColrI
E X! } X!
I –COLR ColrI
E X! } X%]
I COLR
01 – 16 or 32
0 = Auto
1 = Video
2 = S-video
3 = SCART
Y#
Identical to , above, except 0 = no signal.
0 through 255
Additional Description
X! ]
In All
• Tie the video and audio from input
] Tie input 1 to output 3.
All
•
X! ] X!
In RGB
• Tie input
] Tie input 10 RGB to output 4.
RGB
•
X! ] X!
In Vid
• Tie input
]
Tie input 7 video to output 5.
Vid
•
X! ] X!
In Aud
Tie input
•
]
Tie input 24 audio to output 4.
Aud
•
] X! X!
*& , *% , and
Enter multiple tie commands ( ! , & , % , and $) before the
RGBHV input
X@
$ are also valid.
Additional Description
Y# Y$] X!
*
Set input
detected video format,
]
Set input 1 to auto. The board reports RGB video.
Y#
Show set (
Execute image sizing, centering, and filtering adjustments
X!
on input .
* X%]
Specify the color adjustment.
X%]
* Increase the color setting by one.
X%]
* Decrease the color setting by one.
Show the color setting.
4 = YUV interlace
5 = RGB
6 = YUV
X!
to output
X@
RGB to output . Audio is broken away.
X@
video to output . Audio is broken away.
X@
audio to output . Audio is broken away.
X!
*$ are also valid.
X! X@ X@ X@
is tied to output . & ,
Y#
to video format. The board reports the
Y$
, in response.
Y$
) and detected ( ) video format for input
X@
.
}
.
% , and
X!
.