Command And Response Table For Sis Commands - Extron electronics FOX3 Matrix Series User Manual

Command and Response Table for SIS Commands

Command
Function
NOTE:
Commands can be entered back-to-back in a string, with no spaces. For example:
Output switching
NOTES:
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The matrix switchers support 3-digit numeric (
! tie
• The command connects all available signals for the Tx to the Rx.
• When you create a tie where
• When you create a tie where
• If a System Map has been initiated, the Input number (
ports.
• If the user attempts to make a tie between an input and output that are not in the same partition, the matrix does not make the tie and issues an
E14
error message.
^ #
• The and commands issue an
Tie input to output
Tie input to output
Tie input to output
Tie return audio source to
destination
Tie input to output USB 2.0
Tie input to output HID
0*!
TIP:
clears all ties.
X!
KEY:
= Input number
X#
= Output number
X3%
= Audio input number
X3^
= Audio output number
X3&
= Return audio source number
X3*
= Analog audio destination number (to Tx)
NOTE:
The FOX3 Matrix 24x has only two analog outputs (
Tie an input to all outputs
Tie input to all outputs
NOTE:
USB 2.0, USB HID, and Return Audio are not switched with this command.
Tie input to all outputs
Tie input to all outputs
X!
KEY:
= Input number
Untie
Untie all outputs
Untie an output
Untie an input
X!
KEY:
= Input number
X#
= Output number
SIS Command
(Host to Device)
001*001
) and 5- digit for Audio ties (
X!
00
= , you tie no input to the specified output (
X#
00
= , you untie all outputs from input
X!
) or Output number (
E14
error message if the FOX3 matrix does not have the LinkLicense for USB breakaway.
X! X#
* !
X! X#
* %
X3% X3^
* $
X3& X3*
* &
X! X#
* ^
X! X#
* #
000
– Maximum number of inputs for your configuration (
000
– Maximum number of outputs for your configuration (
00
– Maximum number of inputs or DMP Expansion
40001
Dante
00
– Maximum number of outputs or DMP Expansion
40001
Dante
00
– Maximum number of outputs (from a Rx unit, DMP Expansion
40001
Dante
00
– Maximum number of inputs
50001
-
X!
*!
X!
*%
X!
*$
000
– Maximum number of inputs for your configuration (
0*!
X#
0* !
X!
*0!
000
– Maximum number of inputs for your configuration (
000
– Maximum number of outputs for your configuration (
FOX3 Matrix Series Switchers • SIS Configuration and Control
Response
(Device to Host)
1*1!002*002!003*003!
50001*50001
X# X#
) (untie ).
X!
.
X#
) can represent a single physical SFP port or a group of SFP
X# X! ]
Out • In • All
X# X! ]
Out • In • Vid
X3^ X3% ]
Out • In • Aud
X3* X3& ]
Out • In • Rta
X# X! ]
Out • In • Usb
X# X! ]
Out • In • Hid
40032 50001 50004
- , Analog -
40032 50001 50004
- , Analog -
40032 50001 50004
- , Analog -
50002
).
X! ]
In • All
X! ]
In • Vid
X! ]
In • Aud
]
In00 • All
X# ]
Out • In00 • All
X! ]
Out00 • In • All
Additional Description
.
).
X! X#
Tie input to output , all signals.
X! X#
Tie input to output , video only.
X3% X3^
Tie input to output , audio.
Tie return audio source to destination.
X! X#
Tie input to output , USB 2.0.
X! X#
Tie input to output , HID.
0
= untie)
0
= untie)
30001 30008
- ,
30001 30008
- ,
30001 30008
-
Tie video and audio input, 3D sync and
IR signals to all outputs.
Tie video input to all outputs.
Tie audio input to all outputs.
0
= untie)
Untie all outputs.
Untie a particular output.
Untie an input from all tied outputs.
0
= untie)
0
= untie)
,
29