Extron electronics XTP CrossPoint 1600 Setup Manual page 22

Command
Audio mutes
Audio mute, HDMI and S/PDIF
Audio mute, analog
Audio mute, both
Audio unmute
Read audio mute
Global audio mute, HDMI and
S/PDIF
Global audio mute, analog
Global audio mute, both
Global audio unmute
View video and audio mutes
View output mutes
Example :
(XTP CrossPoint 3200)
X@
NOTE: = Output number
X1)
= Mute
X2%
= Video and audio mute
Command
Relay controls
Turn on an endpoint relay
Turn off an endpoint relay
Toggle an endpoint relay
Pulse an endpoint relay
Example:
View an endpoint relay status
X!
NOTE: = Input number
X2^
= Relay on endpoint
X2&
= Pulse duration
X2*
= Relay status
SIS Command Response
(Host to Unit to Endpoint) (Endpoint to Unit to Host)
X@
*1Z Amt
X@
*2Z Amt
X@
*3Z Amt
X@
*0Z Amt
X@ X1)]
Z
1*Z Amt1
2*Z Amt2
3*Z
Amt3
0*Z Amt0
E }
VM
X2%
E }
VM
Mut02201000000000000000000003000000
01 – 16 or 32
0 = off (unmuted)
0 = no mute
SIS Command Response
(Host to Unit to Endpoint) (Endpoint to Unit to Host)
EX@ X2^ }
* *1RELY Rely
EX@ X2^ }
* *0RELY Rely
EX@ X2^ }
* *2RELY Rely
EX@ * X2^ *3* X2& RELY } Rely
E }
1*2*3*45RELY Rely1*2*3*45
EX@ X2^ } X2*]
* RELY
01 – 16 or 32
1 or 2
0 through 65535 (each step = 16 ms, see the example above)
0 = Off
Additional Description
X@ ]
*1
Mute output
X@ ]
*2
Mute output
X@ ]
*3
Mute all output
X@ ]
*0
Unmute output
1 = mute on, 0 = mute off.
]
Mute all embedded digital audio outputs.
]
Mute all analog audio outputs.
]
Mute all embedded digital and analog audio outputs.
]
Unmute all audio outputs.
X2%
1 X2% 2 ... X2% n ] Each
starting from output 1. n = either 16 or 32.
Audio is muted on outputs 2 and 3, video on
output 5, and video and audio on output 26. All
]
other outputs are unmuted.
1 = on (muted)
1 = video mute 2 = audio mute
Additional Description
X@ X2^ ]
* *1
Turn on relay
X@ X2^ ]
* *0
Turn off relay
X@ X2^ ]
* *2
Toggle (on-to-off or off-to-on) relay
X@ * X2^ *3* X2&]
Turn on relay
X2&
as
]
Turn on relay 2 in output endpoint 1 for 720 ms
(0.72 sec,
On or off.
1 = On
X@
embedded digital (audio off).
X@
analog (analog audio off).
X@
audio (digital and analog audio off).
X@
(digital and analog audio on).
response is the mute status of an output,
3 = video and audio mute
X2^ X@
in output .
X2^ X@
in output .
X2^
X2^ X@
in output for an interval defined
X2&
. Each step of is 16 ms.
X2&
= 45 * 16 ms = 720 ms).
X@
in output .