Extron electronics XTP CrossPoint 1600 Setup Manual page 17

Command
Tint (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Tint adjustments are available for NTSC S-video, and NTSC composite video inputs.
Set a specific tint value
Increment tint value
Decrement tint value
View the tint value
Brightness (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Brightness adjustments are available for RBGcvS (SCART), interlaced component video (YUVi), S-video, and NTSC composite video
inputs.
Set a specific brightness value
Increment brightness value
Decrement brightness value
View the brightness value
Contrast (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Contrast adjustments are available for RBGcvS (SCART), interlaced component video (YUVi), S-video, and NTSC composite video
inputs.
Set a specific contrast value
Increment contrast value
Decrement contrast value
View the contrast value
X!
NOTE: = Input number
X%
= Picture adjustments
Command
Pixel phase (available for inputs on an XTP CP 4i VGA universal analog input board only)
NOTE: Pixel phase adjustments are available for RBGHV and non-interlaced component video (YUVp) video inputs.
Set a specific pixel sampling phase
Increment sampling value
Decrement sampling value
View the sampling value
Horizontal shift (available for inputs on an XTP CP 4i VGA universal analog input board only)
Specify a horizontal position
Increment right
Decrement left
View the horizontal position
Vertical shift (available for inputs on an XTP CP 4i VGA universal analog input board only)
Set a specific vertical position
Increment up
Increment down
View the vertical position
X!
NOTE: = Input number
X%
= Picture adjustments
X^
= Shift
SIS Command Response
(Host to Unit) (Unit to Host)
E X! X% } X!
I * TINT TintI
E X! } X!
I +TINT TintI
E X! } X!
I –TINT TintI
E X! } X%]
I TINT
E I X! * X% BRIT } BritI X!
E X! } X!
I +BRIT BritI
E I X! –BRIT } BritI X!
E X! } X%]
I BRIT
E X! X% } X!
I * CONT ContI
E X! } X!
I +CONT ContI
E X! } X!
I –CONT ContI
E X! } X%]
I CONT
01 – 16 or 32
0 through 255
SIS Command Response
(Host to Unit) (Unit to Host)
E X! X% } X!
I * PHAS PhasI
E X! } X!
I +PHAS PhasI
E X! } X!
I –PHAS PhasI
E I X! PHAS } X%]
E X! X^ } X!
I * HCTR HctrI
E X! } X!
I +HCTR HctrI
E X! } X!
I –HCTR HctrI
E I X! HCTR } X^]
E X! X^ } X!
I * VCTR VctrI
E X! } X!
I +VCTR VctrI
E X! } X!
I –VCTR VctrI
E I X! VCTR } X^]
01 – 16 or 32
0 through 255
0 through 65535
Additional Description
X%] Specify the tint adjustment.
*
Increase the tint setting by one.
X%]
*
X%] Decrease the tint setting by one.
*
Show the tint setting.
Specify the brightness adjustment.
* X%]
X%] Increase the brightness.
*
Decrease the brightness.
* X%]
Show the brightness setting.
X%]
* Specify the contrast adjustment.
X%]
* Increase the contrast.
X%]
* Decrease the contrast.
Show the contrast setting.
Additional Description
X%]
* Specify the pixel sampling phase.
X%]
*
Increase the phase value.
X%]
* Decrease the phase value.
Show the pixel sampling phase.
X^] X!
*
Set input horizontal position to
X^] X!
*
Shift the input right.
X^] X!
*
Shift the input left.
Show the horizontal position.
X^] X!
*
Set input vertical position to
X^] X!
*
Shift the input up.
X^] X!
*
Shift the input down.
Show the vertical position.
X^
.
X^
.