Sis Command And Response Table For Xtp T Hdmi - Extron electronics XTP CrossPoint 1600 Setup Manual

Command
Information requests
Information request
Request part number
Request input/output board
configuration
Example
(XTP CrossPoint 3200)
Query firmware version
Example:
NOTE: • = Space
X1(
= Number (quantity) of inputs
X2)
= Number (quantity) of outputs
X2!
= Part number
X2@
= Installed input board
X2#
= Installed output board
X2$
= Firmware version number to second decimal place (x.xx)

SIS Command and Response Table for XTP T HDMI

NOTE: These commands allow you to control and monitor the HDMI transmitter endpoint from the matrix switcher.
Command
Audio routing selection
NOTE: These commands select between the audio embedded in the digital video stream and the 2-channel analog audio.
Input audio selection
Example:
View input audio selection
View all input audio selections
Audio input gain and attenuation
NOTE: The set gain (G) and set attenuation (g) commands are case sensitive.
Set input level to +dB value
Example:
Set input level to -dB value
Increment gain
Example:
Decrement gain
Read input level
NOTE: • = Space
X!
= Input number
X1!
= Input audio source
X1@
= Audio gain
X1#
= Numeric dB value
X1$
= Audio attenuation
SIS Command Response
(Host to Unit) (Unit to Host)
X1(
I V X
X2!]
N
*N
X2! X2@
.
*N
Input slot 6 = XTP CP 4i VGA
Input slot 3 = XTP CP 4i HDMI
X2$]
Q
Q 1.23 ]
SIS Command Response
(Host to Unit to Endpoint) (Endpoint to Unit to Host)
E X! X1! }
I * AFMT AfmtI
E }
I1*0AFMT AfmtI1*0
E X! } X1!]
I AFMT
E } X1!
IAFMT
X! X1@
* G In
1*2G In01•Aud+02
X! * X1$ g In
X!
+G In
5+G In05•Aud+03
X!
–G In
X! G X1#]
01 – 16 or 32
0 = Auto (see the example above)
1 = HDMI (de-embedded digital audio) (default)
0 to +24 (1 dB per step)
–18 to +24 (45 steps of gain or attenuation) (Default = 0 dB)
1 – 18 (1 dB per step)
Additional Description
X2) X1( X2)]
A X
In the response: V
•
See the Extron website, www.extron.com, for part
numbers.
n n
X2@ X2@ X2# X2# X2# ]
1 2 ... 1 2 ...
Part number, dot, 4 or 8 (
installed, starting from input slot 1, followed by 4 or 8
X2#
( ) s; each is the output board installed, starting from
n
output slot 1.
Output slot 2 = XTP CP 4o (XTP)
60-1167-01.GGHFXFIHDDDEJXXM
Input: 1 2 3 4 5 6 7 8
Output: 1 2 3 4 5 6 7 8
The factory-installed controller firmware version is 1.23
(sample value only).
4 , 8 , 12 , 16 , 20 , 24 , 28 , 32
4 , 8 , 12 , 16 , 20 , 24 , 28 , 32
60 -nnnn- 01
F = XTP CP 4i VGA H = XTP CP 4i HDMI
G = XTP CP 4i (TP) I = XTP CP 4i DVI Pro
X = No board installed
D = XTP CP 4o (TP) J = XTP CP 4o DVI Pro
E = XTP CP 4o HDMI M = XTP CP 4o SA (stereo audio)
X = No board installed
Additional Description
X! X1!]
*
]
Auto (0): HDMI (digital) takes priority over analog.
X1! X1! X1! ]
...
1 2 3 n Each
starting at input 1. n is 16 or 32.
X! X1#]
•Aud
]
Set input 1 audio gain to +2 dB.
X! X1#]
•Aud
X! X1#]
•Aud Increase gain by 1 dB.
]
Increase audio input 5 level from +2 dB to +3 dB.
X! X1#]
•Aud Decrease gain by 1 dB.
X1( X2)
X is the video matrix size.
X1( X2)
A X is the audio matrix size.
X2@
n ) s; each is the input board
Output slot 7 = No Board
X1!
is the enable or disable status of an input,
2 = Analog (local 2-channel audio)