Table of Contents
Advertisement
2.0 Printer and Fiscal Unit Status
2.1 For GR3/GR5 Models (RS-485)
The fiscal unit response to the application program is contained in the fiscal unit status, which is 9 bytes
long (6 bytes for the printer status and 3 bytes for fiscal unit status).
For compatibility reasons, the printer status bytes received from the 4610 are mapped in the closest possible
way to the model 3 status bytes.
The "MAPPED FROM" column shows from which byte/bit of the 4610 status bytes was the returned taken
form.
The following table shows the content of the fiscal unit status.
BYTE
BIT
CONTENT
0
PRINTER UNIT STATUS
0 (LSB)
COMMAND COMPLETE
Set to 1 when the command is complete.
1
LEFT HOME POSITION
Set to 1 when the print head is in the left home position.
RESERVED (Always = ' 0 ' )
2
3
MICR PRESENT
Set to 1 when the micr is present.
RESERVED (Always = ' 0 ' )
4
5
HOME ERROR
6
DOCUMENT ERROR
The document not inserted after document station was selected
and the wait timed out.
7 (MSB)
COMMAND REJECT
1
PRINTER UNIT STATUS
0 (LSB)
CASH RECEIPT PRINT ERROR
Paper cover is open or the CR station is out of paper.
RESERVED (Always = ' 0 ' )
1
2
PRINTER KEY PRESSED
Set to 1 when a printer key operation is in progress.
3
EC LEVEL
Set to 1 when responding to an EC level request.
4
SJ COVER OPEN
Set to 1 when the cover in SJ station is open.
5
DOCUMENT READY
Set to 0 when the DI station is ready for printing.
This occurs when both document sensors are made and the document
has been fed to the first print position.
6
DOCUMENT PRESENT UNDER THE FRONT SENSOR
Set to 0 when a document is under the front document sensor.
7
CASH RECEIPT PRINT ERROR
Paper cover is open or the CR station is out of paper.
Figure 1. Printer and Fiscal Unit Status - GR3/GR5 Models - Part 1 of 2
Printer and Fiscal Unit Status — Page 19 of 183
MAPPED FROM
BYTE
BIT
n/a
1
2
n/a
n/a
n/a
3
1
3
2
1
6
n/a
7
4
5
1
5
6
2
0
2
1
Advertisement
Table of Contents
