Electrical Equipment
WATER TEMPERATURE
DASHBOARD CHECK
•
Disconnect the water thermistor connector and
connect an electrical resistance (from the connector
side) between the orange/red and white/black cables.
•
Turn the key to ON and verify the indication on the
dashboard.
Connector values:
<60 Ω
resistance
80 Ω
resistance
>1090 Ω
resistance
WATER THERMISTOR CHECK
See (COOLANT THERMISTOR FUNCTION CHECK)
pages 6-14.
FUEL LEVEL
DASHBOARD CHECK
•
Disconnect the pump assembly connector and
connect an electrical resistance (from the connector
side) between the yellow-green and orange-black
cables.
•
Turn the key to ON and verify the indication on the
dashboard.
Connector values:
resistance 250 Ω 1/2 scale indication ±5°
resistance 3 Ω
full indication
resistance 820 Ω empty indication and indicator lit
FUEL LEVEL SENSOR CHECK
•
Disconnect the pump assembly/sensor connector.
•
Connect an ohm meter to terminals 2 and 3 and
verify the indication at different fuel levels.
Correct value with full tank - less than 16 Ω
Correct value with 8 litres of fuel - 300-400 Ω
Correct value with Ø litres - more than 800 Ω
6-22
bottom scale indication
start of red zone indication ±5°
start of scale indication
Release 00
2002-09
Atlantic 500
VIEWED FROM "A"
R
chap. 6