Electrical Equipment
STAND SWITCH CONTROL
Rotation of the side stand (1) must be free from
obstruction.
Carry out the following checks:
•
The springs (2) must not be damaged, worn, rusty
or weakened.
•
The stand must turn freely, by greasing the joint if
necessary, see (TABLE OF LUBRICANTS).
On the side stand (1) there is a safety switch (3) with
the role of preventing or interrupting engine running
with the side stand (1) lowered.
To check that the safety switch is working (3):
•
Sit on the saddle in driving position.
•
Raise the side stand (1).
•
Start the engine.
•
With the throttle twistgrip released and the motor
idling, lower the side stand (1) which should
activate the safety switch (3).
At this point:
-
the engine should stop;
-
on the dashboard the side stand lowered indicator
"
" should light up.
If this does not happen, replace the switch (3).
STAND SWITCH
Position
N
Lowered
Raised
chap. 6
Cables
V
N
Release 00
Atlantic 500
2002-09
6
6-5