APRILIA Atlantic 500 Workshop Manual page 96

Electrical Equipment
MULTIFUNCTION LCD DISPLAY
Turning the ignition key (1) to position " ", all the
segments on the Multifuncion LCD display are acti-
vated for a few seconds (in this way working checks
are carried out on the components) and the last
function imposed after the vehicle was stopped is
visualized.
CAUTION
After the first 1,000 Km (625 mi) and then every
6,000 Km (3,750 mi), SERVICE will appear on the
display.
In this case carry out the operations prescribed in
the periodical maintenance programme, see pages
2-3 (PERIODICAL MAINTENANCE PROGRAMME).
The various functions are selected then visualized on
the display by pressing the MODE button (2) on the
controls to the left side of the handlebars.
The segments forming the multifunction LCD display
are as follows:
Chronometer indicator (3), programmed maintenance
due icon (4), average speed icon expressed in mph
(5), average speed (6), battery tension icon (7),
average speed icon expressed in Km/h (8).
(The same icon is used for the consumption function
expressed with the symbol Km//l, consumption
expressed in ml/G (used only for
maximum speed icon (10), external temperature icon
expressed in degrees Celsius (°C)(11), external
temperature icon expressed in degrees Fahrenheit
(°F) (12), six-figure displays of the values relating to
the functions set and identified by the respective icons
(13).
By pressing the MODE button, the functions are
obtained in the following sequence:
External temperature in °C
MODE
Maximum speed (Vmax)+km/h or mph
MODE
Average speed AVG (Km/h or mph)
MODE
Battery tension (Vbatt)
MODE
Fuel consumption (km/L or ML/G)
MODE
Chronometer (LAP)
MODE
Km to next maintenance programmed (SERVICE)
MODE
chap. 6
versions) (9),
↓
↓
↓
↓
↓
↓
↓
6
5
AVG V
mph
SERVICE
4
LAP
3
1
Release 00 2002-09
Atlantic 500
9 10
8
7
Km/h ml/G Vmax
BATT
" "
°C
°F
.
CEV
13
2
11
12
6
6-25