Cycle parts
LEFT AND RIGHT HAND INSPECTION COVER
REMOVAL
Place the vehicle on the central stand.
Remove the left and right hand rubber mats (1) by lift-
ing them up with the hands.
Unscrew and remove the screw (2).
CAUTION
Work with care.
Do not damage the tabs (3) and/or the relative
seats. Handle the painted and plastic components
with care. Do not drag them or ruin them.
Utilising a screwdriver, pull up the lower part of the
inspection cover (4) until it slips out from its seat.
CAUTION
When reassembling, correctly insert the tabs into
their relative seats
LEGSHIELD REMOVAL
Place the vehicle in the central stand.
CAUTION
Work with care.
Do not damage the tongue and/or the relative
seats. Handle the painted components with care.
Do not drag them or ruin them.
Remove the rubber foot mat by lifting it with the
hands.
Unscrew and remove the three screws (1).
Open the door of the document compartment (see
DOCUMENT COMPARTMENT).
Unscrew and remove the three screws (2).
CAUTION
Work with care.
Do not damage the plastic finish.
7-4
Release 00
2002-09
1
3
3
1
2
chap. 7
Atlantic 500
2
4