Electrical Equipment
RPM SENSOR CHECK
With motor off:
•
Disconnect the three-way connector (1) and take
measurements.
With a multimeter (scale x 100 Ω) measure the
•
resistance between the sensor terminals,
observing polarity (see diagram).
Standard value: 680 Ω Ω Ω Ω Ω ± 10%
•
If the resistance is infinite or different from the
prescribed value, the sensor must be replaced.
6-12
Release 00
2002-09
Atlantic 500
1
-
+
Ω
+
chap. 6