Electrical Equipment
FULL BEAM BULBS
•
Turn the bulb socket/bulb (8) anticlockwise and
extract it from the parabolic setting.
CAUTION
To remove the bulb socket/bulb from its connec-
tion, take special care not to damage the two
housings (9).
•
Remove the bulb (10).
•
Correctly fit a bulb of the same kind.
•
For reassembly, repeat the operations in reverse
order.
PARKING LIGHT BULBS
CAUTION
To extract the bulb socket, do not pull its electric
wires.
•
Working from the front of the vehicle, grasp the
bulb socket (11), pull it and take it out of its seat.
•
Extract the parking light bulb (12) and replace it
with a new one of the same type.
REPLACING THE REAR LIGHT BULBS
Carefully read BULBS.
The rear light contains:
–
Two bulbs for parking/stop lights (1).
–
Two bulbs for rear indicator lights (2).
To change them:
•
Raise the saddle,see (SADDLE UNBLOCKING
AND BLOCKING).
NOTE
The following information is only for one
indicator but is valid for both operations.
•
Remove the fixing pommel (3) of the rear lights
assembly of the vehicle.
6-34
Release 00
2002-09
9
10
8
11
1
2
chap. 6
Atlantic 500
12
1
2