Installation - Magnum Energy ME Series Operator's Manual

2. Installation

Installing the ME Series Remote Control
1. Determine a suitable location to mount the remote control. It must be located in
a clean, dry and protected place.
Allow ample room to access the remote's adjustment dial and to v i e w t h e
L E D s f o r t r o u b l e s h o o t i n g . P r e d r i l l t h e f o u r 1 / 8 " h o l e s as necessary.
2 . R o u t e t h e 4 w i r e t w i s t e d p a i r w i r i n g f r o m t h e i n v e r t e r /
charger to the remote. Connect the wiring to the rear of the remote and to the
remote port on the inverter/charger.
3. Use the four 6x3/4" screws to mount the remote to the coach's wall
o r b u l k h e a d .
Figure 1
ME Series Remote Control
Ó 2003 - Magnum Energy, Inc. 3