2.4.e
Install new control board in reverse order making sure to line up connector on
board edge with FET board connector before pushing down on control
board.
2.4.f Re-install Top Cover
2.5.a
Remove top cover per 2.1
2.5.b
Remove 2- ¼ x 20 bolts and nuts from inside DC plate
2.5.c
Remove 2- #10 x ¾ Torx screws from outside DC plate
2.5.d
Pull firmly straight up to remove DC plate from base
2.5.e
Re-install DC plate in reverse order.
2.5.f
Re-install Top Cover