Table of Contents
Advertisement
[2] Beeper/Vibration
Double-tap "Beeper/Vibration" at the System Properties screen to display
the screen on the right.
This menu is used to adjust the beeper volume and switch between the
beeper and vibrator.
Adjusting the Beeper Volume
Sets the beeper volume for each operation.
Beeper:
Key clicks:
Screen taps
Trigger key clicks*:
* The trigger switch can be assigned to magic keys.
Switching between the Beeper and Vibrator
Select one of the following three patterns for notification of code scanning
completion.
Beeper:
Vibration:
Beeper/Vibration:
Select the beeper volume from 0 (low) to
5 (high). (Default: 5)
Select the beeper volume when a key is
pressed. (Default: Loud)
Select the beeper volume when screen
is tapped. (Default: Loud)
Beeper setting when the trigger switch is
pressed. (Default: OFF)
Beeper only (default)
Vibrator only
Simultaneous beeper and vibrator
2D Code Handy Terminal
79
Advertisement
Table of Contents
