Advanced Wireless Settings
Tap the [Advanced...] button at the "Wireless Information" tabbed page to
display the screen on the right.
Use Windows to configure my wireless settings:
This check box should normally be selected.
Preferred Networks:
Displays a list of wireless networks for which connection is set.
Connection is attempted starting from the wireless network displayed
at the top.
Select a wireless network and tap the [Up] or [Down] button to change
the order in which the selection displays in the list.
Select a wireless network and tap the [Delete] button to delete the
selected wireless network from the list.
Automatically connect to non-preferred networks:
Select this check box to also attempt a connection to wireless networks for which connection has not
been set.
Networks to access:
Used to select accessible networks.
All available:
Access is possible for both access points and other network devices.
Only access points:
Access is possible only between the BHT and access point.
Only computer-to-computer:
Access is possible only between the BHT and other network devices.
Wireless Networking Log
Tap the [Log...] button at the "Wireless Information" tabbed page to
display the screen on the right.
The communication log for the wireless network displays.
2D Code Handy Terminal
113