Table of Contents
Advertisement
BHT-700QWB-CE/700QWBG-CE
[4]
ActiveSync(RF)
Tap "4:ActiveSync(RF)" at the Communication menu to connect to the host computer by wireless
communication.
− Point −
1.
Open the wireless device.
The screen on the right displays when a connection to the network has
been established.
− Note −
2.
Select "Network Connection" for the connection method, specify
the name of the host computer in the "Connect to" field, and tap the
[Connect] button.
72
Before running "ActiveSync(RF)", it is necessary to set up a partnership between the host
computer and BHT by running "ActiveSync (Infrared)" or "ActiveSync (USB)".
It will not be possible to run "ActiveSync(RF)" if the wireless settings are incorrect.
Refer to "4.4.3 System Properties" – "[8] NIC Control", or "4.5 Wireless Network Settings"
before making wireless settings.
ActiveSync(RF) cannot be used with ActiveSync 4.X. Use ActiveSync 3.8 or earlier
version.
Connecting to the network may take several tens of
seconds depending upon the network environment.
(When the DHCP is used to obtain an IP address,
connecting to the network will require more time than
when the IP address is fixed.)
If unable to establish a connection to the network, the
wireless settings may be incorrect. Check the wireless
settings again.
Advertisement
Table of Contents
