Using The Stylus; Touch Screen Operation - Denso BHT-700QWB-CE User Manual

2d code handy terminal
Table of Contents

Advertisement

BHT-700QWB-CE/700QWBG-CE

2.3.3 Using the Stylus

The BHT liquid crystal display (LCD) is a touch screen. Buttons,
menus and so displayed on the screen can be selected using the
stylus provided.
Always perform touch screen calibration before operating the
touch screen.
(Refer to "2.4 Initial Setup".)

2.3.4 Touch Screen Operation

Select the LCD touch screen buttons and menus and so on using the stylus provided.
Action
Tap
Double-tap
Drag
Long-tap
• Always use the stylus provided to operate the touch screen. Never use fingernails or any pointed or hard
objects, or apply strong pressure or impact to the touch screen. This may result in damage or a
malfunction.
• If dirty, clean the touch screen and stylus tip prior to operation. Failure to observe this may result in
scratches to the LCD screen or hinder smooth movement of the stylus.
24
This involves tapping the touch screen once. This function is the equivalent of a "click"
with a mouse on a computer.
This involves tapping the touch screen twice in quick succession. This function is the
equivalent of a "double-click" with a mouse on a computer.
This involves moving the stylus to an object while pressing the touch screen. This
function is the equivalent of "dragging" with the mouse on a computer.
This involves tapping the touch screen for several seconds.
equivalent of a "right-click" with the mouse on a computer.
Description
This function is the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-700qwbg-ce

Table of Contents