Denso BHT-700QWB-CE User Manual page 37

2d code handy terminal
Table of Contents

Advertisement

Charging with the battery charger (CH-704)
• Charge batteries in temperature from 0°C to 40°C (32°F to 104°F).
1.
Check the battery cartridge terminals
and insert the cartridge.
2.
Connect the power cable to the CH-704 and
connect the plug to a commercial AC power
source (100 V AC).
3.
The red LED flashes slowly (1 second ON,
1 second OFF) when charging is complete.
− Point −
Charging takes approximately 3 hours
(standard
cartridge) or 6 hours (large-capacity
rechargeable battery cartridge).
An only slightly discharged battery
cartridge should take this time to
become fully charged.
* The battery cartridge shown in the drawing is the BT-700LL.
rechargeable
battery
2D Code Handy Terminal
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-700qwbg-ce

Table of Contents