Denso BHT-700QWB-CE User Manual page 36

2d code handy terminal
Table of Contents

Advertisement

BHT-700QWB-CE/700QWBG-CE
4.
Connect the dedicated AC adapter to the
DC input connector on the charger and
plug the adapter into the wall socket.
5.
Place the BHT on the charger.
After placing the BHT on the charger
− Point −
when using the BHT for the first time or
when left unused for long periods of time,
do not remove from the charger for
approximately
rechargeable battery cartridge) or 6 hours
(large-capacity
cartridge).
− Note −
The BHT is equipped with a back-up battery used to back-up the internal memory and calender
clock. The internal back-up battery is charged first when charging is commenced.
Do not remove the BHT from the charger for at least 2 days when using the BHT for the first time or
when using after long periods of time.
6.
The BHT indicator LED will change to green
when charging is complete.
− Point −
18
3
hours
rechargeable
Charging takes approximately 3 hours
(standard
rechargeable
cartridge) or 6 hours (large-capacity
rechargeable battery cartridge).
An only slightly discharged battery
cartridge should take this time to
become fully charged.
The charger Power LED (green)
turns ON.
The LED illuminates
in red and charging
begins.
(standard
battery
The LED illuminates in
green when charging is
battery
complete.
Red LED ON
Green LED ON

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-700qwbg-ce

Table of Contents