Charging The Bht - Denso BHT-700QWB-CE User Manual

9.5 Charging the BHT

9.5.1 Charging the BHT
The battery cartridge is charged while loaded in the BHT.
• Charge batteries in temperature from 0°C to 40°C (32°F to 104°F).
− Note − Perform charging after turning OFF the BHT.
Battery Cartridge Service Life
− Note −
The capacity of the lithium-ion battery used in the battery cartridge will gradually deteriorate
during the repeated cycles of charging and discharging, even under normal use. Replace the
battery cartridge with a new one if the power consumption period becomes shorter even after
charging for the specified length of time. Generally, battery cartridge replacement is required
after approximately 300 cycles of charging and discharging.
1.
Turn ON the CU power.
The POWER LED illuminates in green.
2.
Turn OFF the BHT power before placing on the CU.
The BHT charge LED illuminates in red and charging is commenced.
Charging Time
Rechargeable battery cartridge type
Standard rechargeable battery cartridge
Large-capacity rechargeable battery cartridge
The charge LED turns green when charging is complete.
3.
Remove the BHT from the CU.
2D Code Handy Terminal
Charging Time
Approx. 3 hours
Approx. 6 hours
155