Denso BHT-700QWB-CE User Manual page 121

If ActiveSync connection via the USB interface port is successful...
If ActiveSync connection is successful, the beeper sounds once and the
ActiveSync icon displays in the task tray (circled in red on right).
If ActiveSync connection via the USB interface port fails...
If ActiveSync connection fails, the ActiveSync icon does not display.
Terminating the USB interface test
The USB interface can be terminated either by disconnecting the USB cable or by disconnecting the link
with the icon in the task tray (as described below).
1.
Double-tap the ActiveSync icon displayed in the task tray (circled in
red on right).
2.
Tap the [Disconnect] button displayed on the screen on the right
(circled in red).
The ActiveSync link is disconnected. The ActiveSync icon then
disappears.
2D Code Handy Terminal
103