Table of Contents
Advertisement
[5] Power Management
Double-tap "Power Management" at the System Properties screen to
display the screen on the right.
This menu is used to set the automatic power-off timer, standby timer and
CPU clock speed.
Automatic Power off Time:
Battery Power:
Sets the automatic power-off time from 0 to 32767 seconds when the
BHT is not on the CU. The power does not automatically turn OFF
when set to 0. (Default: 180)
External Power:
Sets the automatic power-off time from 0 to 255 seconds when the BHT is placed on the CU. The
power does not automatically turn OFF when set to 0. (Default: 0)
When the "Enable automatic power off with wireless communication" check box is selected, the
power turns OFF automatically when not performing communication, even if a wireless connection is
open.
Switch to Standby Mode:
Timer (x 100 ms):
Sets the waiting time to switch to the standby mode from 0 to 255 in 100ms units.
(10: 100ms x 10 = 1 second)
CPU Performance:
Normal:
Select to operate the CPU at normal clock speed. (Default)
Fast:
Select to operate the CPU at a higher clock speed.
− Note −
Setting the CPU performance to Fast consumes much power, reducing the BHT operation
period following battery charging.
The "CPU Performance" setting is valid when the BHT power is next turned ON.
2D Code Handy Terminal
83
Advertisement
Table of Contents
