Table of Contents
Advertisement
IrDA Interface Test
Prepare two BHTs, one as a master station and the other as a slave station (for testing) with their IR ports
facing each other as illustrated below. In this test, the slave BHT transmits data to the master BHT and
receives the data returned from the master BHT.
Tap "1:OPTICAL" at the COM menu to display the SLAVE/MASTER
selection screen on the right.
Tap "1:SLAVE" at the BHT being tested, and "2:MASTER" at the master
BHT.
The screen on the right displays during testing.
XXXXX :
Communication speed (2400, 9600, or 115200 bps)
YYY :
Transmitted HEX data (0 to 256)
Upon successful test completion, the beeper sounds once and the screen
on the right displays at the BHT being tested (slave).
The master BHT automatically returns to the COM menu.
Data
0.15 m or less
Master
Slave (for testing)
2D Code Handy Terminal
101
Advertisement
Table of Contents
