Table of Contents
Advertisement
BHT-700QWB-CE/700QWBG-CE
Performing a Ping test
Tap the "Ping" tabbed page at the NIC Control menu to display the screen
on the right.
Dest IP:
Data size:
Interval:
Timeout:
Type1 or Type2:
Count:
Tap the [Ping Start] button or press the ENT key to commence the Ping test.
Tapping the [Ping Start] button when the wireless device is not open automatically opens
− Note −
the wireless device and commences the Ping test.
Setting ranges
Item
Data size
Interval
Timeout
Count
* By setting zero (0), the number of echo requests sent will be infinite (until the Ping test is aborted.)
If a value outside the allowable entry range is specified, the nearest value within the range will
automatically be applied.
The screen on the right displays when the Ping test is commenced.
Count:
OK:
NG:
Timeout:
RTT Ave.(ms):
92
Specifies the IP address of the host computer
to be pinged.
Specifies the data size of the echo request.
Specifies the length of echo request intervals (in
100 ms units).
Specifies the timeout period (in 100ms units) for
the echo request.
Specifies the echo request transmission timing
(described on next page).
Specifies the number of echo requests to be sent.
Allowable Entry Range
1 to 2048
0 to 65535
0 to 65535
0* to 65535
Number of echo requests sent
Number of echo replies
Number of errors that occurred while
performing the Ping test
Number of timeouts (for echo requests)
that occurred while performing the Ping test
Echo reply time
Default Value
32
10
10
4
Advertisement
Table of Contents
