Denso BHT-700QWB-CE User Manual page 107

2d code handy terminal
Table of Contents

Advertisement

Displaying the IP Address and MAC Address
Tap the "Network" tabbed page at the NIC Control menu to display the
screen on the right.
This menu displays the following information.
DHCP/Static:
DHCP usage/not used
IP Address:
BHT IP address
Subnet mask:
Subnet mask
Gateway:
Default gateway
DNS Server:
DNS IP address
WINS Server:
WINS IP address
MAC Addr:
BHT MAC address
− Note −
The MAC address displays as "00:00:00:00:00:00" when the wireless device is not opened.
Tap the [Property] to display the screen on the right.
This menu can be used to perform the following processes.
• Setting the IP address
• Setting the name servers
The IP address is set at the "IP Address" tabbed page.
Obtain an IP address via DHCP:
Select this option to automatically obtain a dynamic IP address from
the DHCP server.
Specify an IP address:
Select this option to manually enter a static IP address and then enter
the address.
Tap the "Name Servers" tabbed page to display the screen on the right.
Enter IP addresses for the name servers.
Primary DNS:
Enter the IP address for the Primary DNS server.
Secondary DNS:
Enter the IP address for the Secondary DNS server.
Primary WINS:
Enter the IP address for the Primary WINS server.
Secondary WINS:
Enter the IP address for the Secondary WINS server.
Consult with the network administrator concerning IP addresses.
− Note −
2D Code Handy Terminal
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bht-700qwbg-ce

Table of Contents