Communication Menu - Denso BHT-700QWB-CE User Manual

2d code handy terminal

Table of Contents

BHT-700QWB-CE/700QWBG-CE

4.4.2 Communication Menu

Tap "2: Communication" at the System Menu to display the screen on the

right.

[1] Ymodem:

[2] ActiveSync(Infrared):

[3] ActiveSync(USB):

[4] ActiveSync(RF):

[5] ActiveSync(LAN):

[1] Ymodem Menu

The Ymodem can be used to communicate with the host computer using

the following procedure.

Select "1:Ymodem" at the Communication menu to display the screen on

the right.

Button (1): Sets the communication environment.

Button (2): Downloads files to the BHT.

Button (3): Uploads files stored in the BHT to the host computer.

Communication Environment Settings

Tap button (1) at the Ymodem menu to display the communication environment settings screen.

RS-232C Interface Settings

To perform RS-232C communication with the host computer via the

connector interface port, specify "Serial(COM1:)" for "Port". The screen on

the right displays.

Specify the same settings as those at the host computer for "BaudRate",

"Parity", "StopBits", "LinkTimeout", "Retrans Interval" and "TransTimeout".

Data bits are fixed at 8.