Table of Contents
Advertisement
4.4.3 System Properties
Tap "3:System Properties" at the System Menu to display the screen on
the right.
[1] QRcode:
[2] Beeper/Vibration:
[3] Control Panel:
[4] File System:
[5] Power Management: Opens the Power Management menu.
[6] Key:
[7] Status Display:
[8] Radio Frequency:
[9] Bluetooth:
[1] QRcode Menu
Double-tap "QRcode" at the System Properties screen to display the
screen on the right.
INVERT:
REVERSE:
DECODE LEVEL:
LIGHT:
SCAN MODE:
MARKER:
OPTION DATA:
MINIMUM DIGITS:
ITF:
CODABAR:
Black-and-white inverted code reading function (INVERT)
This function makes it possible to read white cells/bars on a black background.
NORMAL:
Normal code (black cells/bars on a white background) reading
INVERT:
Invert code (white cells/bars on a black background) reading
AUTO:
Both types of codes reading (automatic detection)
The automatic detection reading may take more than normal code or invert code reading.
− Note −
Opens the code menu.
Opens the Beeper/Vibration menu.
Opens the Control Panel.
Opens the File System menu.
Opens the Key menu.
Opens the Status Display menu.
Opens the NIC Control menu.
®
Opens the Bluetooth
menu.
Enables/disables the black-and-white inverted label
read function.
Enables/disables the mirror image 2D code reading
function.
Sets the decode level.
Selects the LIGHT mode.
Selects the SCAN mode.
Sets the marker indicator.
Selects whether or not option data will be added to
the tail of 2D code data read.
Sets the default minimum number of digits to be read for ITF.
Sets the default minimum number of digits to be read for Codabar.
2D Code Handy Terminal
75
Advertisement
Table of Contents
