Table of Contents
Advertisement
BHT-700QWB-CE/700QWBG-CE
2.5 Turning OFF the Power
Use one of the following three methods to turn OFF the BHT power.
Normal power OFF
Turning the power OFF after registry back-up
Auto power OFF
2.5.1 Normal Power OFF
1.
Press the power key.
The BHT power turns OFF after the screen on the right displays.
Do not remove the battery cartridge while the
− Point −
message on the right is displayed.
Failure to observe this may result in data stored in
the BHT being lost.
2.5.2 Turning the Power OFF after Registry Back-up
1.
Hold down the SF key and press the power key.
The message on the right displays and registry back-up is commenced.
The power turns OFF automatically when the back-up is complete.
Do not remove the battery cartridge while the
− Point −
message on the right is displayed.
Failure to observe this may result in data stored in
the BHT being lost.
The Registry is an area in which settings information required for
BHT operation is recorded.
If the Registry is lost, it is automatically restored by the OS.
The error message on the right displays if the OS fails to restore
the Registry (because the Registry has not been backed up).
Refer to "Chapter 4 System Operation" for details of how to
return the Registry to its default status.
26
→ Press the power key.
→ Hold down the SF key and press the power key for 3
seconds or more.
→ The power turns OFF automatically when the BHT is not
used for a set length of time.
Advertisement
Table of Contents
