Denso BHT-700QWB-CE User Manual page 112

BHT-700QWB-CE/700QWBG-CE
®
[9] Bluetooth Properties
Double-tap the "Bluetooth", and the Bluetooth
Info:
Device Addr:
System Ver:
Firmware Ver:
Power Control:
Power On:
Power Off:
When the "Enable Bluetooth when Windows starts" check box is
selected, Bluetooth
Windows CE starts up.
[10] Resetting the Back-up Battery Discharge Count
At the System Properties menu, hold down the SF key and press the "0"
key to display the screen on the right.
This menu displays the memory back-up battery discharge count. When
the back-up battery is replaced, tap the [Reset] button to clear the battery
back-up discharge count to zero (0).
The counter can only be reset after the discharge count
− Note −
reaches 200.
[11] ActiveSync Automatic Connection
At the System Properties menu, hold down the SF key and press the "1"
key to display the screen on the right.
Select both check boxes and tap the [OK] button to enable ActiveSync
automatic connection.
USB:
ActiveSync starts up automatically and a connection with the host
computer is established when the USB cable is connected to the BHT
with the BHT power ON.
Automatic connection is disabled by default.
− Note −
94
Displaying the MAC address of Bluetooth
®
Bluetooth system version
Firmware version of the Bluetooth
®
Enables Bluetooth communication.
®
Disables Bluetooth communication.
®
communication will be automatically enabled when
®
property appears.
®
module
®
module