Power-On-Self Test; Expansion Interface Ii - Analog Devices ADSP-BF592 EZ-KIT Lite Manual

Power-On-Self Test

The power-on-self-test program (POST) tests all EZ-KIT Lite peripherals
and validates functionality as well as connectivity to the processor. Once
assembled, each EZ-KIT Lite if fully tested for an extended period of time
with a POST. All EZ-KIT Lite boards are shipped with a POST preloaded
into one of their on-board flash memories. The POST is executed by
resetting the board and pressing the proper push button(s). The POST
also can be used for reference for a custom software design or hardware
troubleshooting. Note that the source code for the POST program is
included in the VisualDSP++ installation directory along with the
file, which describes how the board is configured to run a
readme.txt
POST.

Expansion Interface II

The expansion interface II allows an Analog Devices EZ-Extender or a
custom-design daughter board to be tested across various hardware plat-
forms that have the same expansion interface.
The expansion interface II implemented on the ADSP-BF592 EZ-KIT
Lite consists of three connectors, which are 0.1 in. shrouded headers (
). The connectors contain a majority of the ADSP-BF592 processor's sig-
6
nals. For pinout information, go to
Schematic" on page
connectors can be obtained by contacting
Support".
For more information about daughter boards, visit the Analog Devices
Web site at:
http://www.analog.com/en/embedded-processing-dsp/Blackfin/pro-
cessors/Blackfin_development_tools/fca.html
ADSP-BF592 EZ-KIT Lite Evaluation System Manual
"ADSP-BF592 EZ-KIT Lite
B-1. The mechanical dimensions of the expansion
Using ADSP-BF592 EZ-KIT Lite
"Technical or Customer
.
P4–
1-11