Ez-Kit Lite Session Startup - Analog Devices ADSP-BF592 EZ-KIT Lite Manual

Evaluation system

Hide thumbs Also See for ADSP-BF592 EZ-KIT Lite:

Table of Contents

EZ-KIT Lite Session Startup

1. If you are running VisualDSP++ for the first time, navigate to the

VisualDSP++ environment via the Start–>Programs menu. The

main window appears. Note that VisualDSP++ is not connected to

any session. Skip the rest of this step to step 2.

If you have run VisualDSP++ previously, the last opened session

appears on the screen. You can override the default behavior and

force VisualDSP++ to start a new session by pressing and holding

down the Ctrl key while starting VisualDSP++. Do not release the

Ctrl key until the Session Wizard appears on the screen. Go to

step 3.

2. To connect to a new EZ-KIT Lite session, start Session Wizard by

selecting one of the following.

• From the Session menu, New Session.

• From the Session menu, Session List. Then click New Ses-

sion from the Session List dialog box.

• From the Session menu, Connect to Target.

3. The Select Processor page of the wizard appears on the screen.

Ensure Blackfin is selected in Processor family. In Choose a target

processor, select ADSP-BF592-A. Click Next.

4. The Select Connection Type page of the wizard appears on the

screen. For standalone debug agent connections, select EZ-KIT

Lite and click Next. For emulator connections, select Emulator

and click Next.

5. The Select Platform page of the wizard appears on the screen.

For standalone debug agent connections, ensure that the selected

platform is ADSP-BF592 EZ-KIT Lite via Debug Agent. For

emulator connections, choose the type of emulator that is con-

1-6

ADSP-BF592 EZ-KIT Lite Evaluation System Manual

Table of Contents

Do you have a question about the ADSP-BF592 EZ-KIT Lite and is the answer not in the manual?