Battery Low Led (Led7); Batt Good Led (Led8); Da Pwr Led (Zled1); Da Mon Led (Zled2) - Analog Devices ADSP-BF592 EZ-KIT Lite Manual

LEDs

Battery Low LED (LED7)

When is lit (yellow), it indicates that the BQ27500 fuel gauge (
LED7
has detected that the remaining capacity of the lithium ion battery is low.
The low threshold can be programmed; for more information, refer to the
BQ27500 data sheet provided by the product manufacturer.

BATT GOOD LED (LED8)

When is lit (green), it indicates that the BQ27500 fuel gauge (
LED8
has initialized the lithium ion battery successfully.
capacity indicator. When the battery switch (
installed jumper (
Ensure that
JP7

DA PWR LED (ZLED1)

When is lit (green), it indicates that the debug agent is powered.
ZLED1

DA MON LED (ZLED2)

When is lit (amber), it indicates that the debug agent is configured
ZLED2
via USB.

DA STAT LED (ZLED3)

When is lit (amber), it indicates that the debug agent is ignoring the
ZLED3
signal.
EMU
2-18
) is , the BATT GOOD LED still illuminates.
JP7 ON
is installed only when
ADSP-BF592 EZ-KIT Lite Evaluation System Manual
is not a battery
LED8
) is , but the battery
SW3 OFF
is .
SW3 ON
)
U17
)
U17