S Tartup F Ormat - Datasat AP20 Installation And Operating Manual

4.3.2 Startup Format
The Startup format is the default format selection when the AP20 is powered up. Select any defined
format or Last Format. Touch the drop down list to open it, then select the format.
Figure 37. Select Startup Audio Format
4.3.3 Edit Formats
Menu (System) > Formats > Edit Formats
Figure 38. Audio Format Edit Screen
Copy Format – Use an existing audio format as a template for a new one.
Select the audio format you wish to copy from by selecting it from the Copy Format From
drop down list. Then, touch the to Format box to bring up the virtual keyboard and enter a
name for the new format.
Press the Copy button to complete the process, or press Cancel to quit.
Copy Preset to Format – Select one of the pre-installed audio formats in your AP20 and
use it as a template for a new one. Select the format you wish to copy from by selecting it
from the drop down box. Then, touch the "to Format" box to bring up the virtual keyboard
AP20 Installation & Operating Guide
AP20 Installation and Operating Guide
Document # 9301H39200 Ver. 1.2
Page 62