Datasat AP20 Installation And Operating Manual page 51

4.1 The Menu Button
The Menu Button is intended to be used by theater technicians only. Password protection is highly
recommended.
Selecting the
This will provide access to the Setup menus.
In the next section, we will discuss in detail the options available through the menu bar. Pressing the
Home button will take you back to the Home or Main screen.
4.2 System Setup Screen
Menu (System) > System Setup
Figure 23. System Setup Screen
The following options are available directly from this screen.
ScreenSaver Time - Options include a 10 second delay, 1 minute delay, or 5 minute delay before screen
saver initiates.
ScreenSaver Mode - Disabled, Dim Screen, or Graphic.
Disabled will turn off the screen saver.
Dim Screen will reduce the LCD brightness after the time specified in the ScreenSaver
Time drop-down menu. Touching the screen or turning the adjustment knob will restore
the brightness.
Graphic mode uses the stored screen saver graphic. Touching the screen or turning the
adjustment knob will restore the Home screen.
LCD Brightness -Use the on-screen slider or the adjustment knob to adjust the brightness of your LCD
screen.
Using the buttons along the bottom of the System Setup screen, you can update the processor software
via the internet, save and restore configurations through the USB interface, assign password protections,
view a log file of system status messages, and check the status of the hardware in real time.
AP20 Installation & Operating Guide
AP20 Installation and Operating Guide
button, after first powering up the AP20, will display the System Setup screen.
Turn adjustment
knob to adjust
brightness
Document # 9301H39200 Ver. 1.2
Page 50