M Anual A Utomation - Datasat AP20 Installation And Operating Manual

Figure 9. Monitor Mix
Select channel(s), then touch the + or – button to adjust volume from 0 to 10.
Touch the small button next to a channel to select it for monitoring.
Touch Close to close the Mix window. It also closes automatically after 5 seconds of
inactivity.
1.4.3 Manual Automation
The Automation button opens the automation manual control screen.
Figure 10. Automation Manual Control screen
This screen allows for direct control of automation events in any order, at any time. Once your theater
technician has linked automation events to macros, and macros have been assigned to buttons, you can
trigger any macro by pressing its button on this screen. A maximum of twenty buttons can be assigned.
If no buttons are visible, or there is a need for additional buttons, please contact your theater service
technician.
For details about using macros see the topic
AP20 Installation & Operating Guide
AP20 Installation and Operating Guide
Macros , page
X X
Touch the small button
to select a channel for
monitoring
8 4 .
X X
Document # 9301H39200 Ver. 1.2
Page 20