Datasat AP20 Installation And Operating Manual page 55

Menu (System) > System Setup > Update System Software
Figure 27. System Software Update Screen
4.2.2.1 Update System Software from Network
The following steps describe how to update your AP20 software automatically through the internet.
Touching the button labeled Update From Network will display the screen shown in
Figure 27
Do not change the field "Update URL" unless instructed by Datasat Customer Support.
To log in to the servers at Datasat Digital Entertainment and download the latest version of
the AP20 software, just touch the Update button.
Note: Your AP20 must already have an active internet connection in order to update software
through the internet.
Connection will take place automatically, and the following screen will appear.
Figure 28. Downloading Software Update via Internet
Depending upon your connection speed, downloading, decompressing, and installing files could take
anywhere from 10 minutes to less than a few minutes to complete. When it has finished with the
installation process you will be prompted to reboot the AP20 by cycling the rear panel power switch. If
you already have the latest version of software, the system will display a message stating: "System does
not require update".
AP20 Installation & Operating Guide
AP20 Installation and Operating Guide
.
X
Document # 9301H39200 Ver. 1.2
Page 54