Overhaul; Selector Shafts - Lotus Elise S1 Service Notes

37M1147
Selector Shaft C o m p o n e n t s
1. Roll pin
2. 5th/reverse gear selector
3. 3rd/4th gear selector fork
4. 5th gear selector fork
5. 5th/reverse selector shaft
6. 1 st/2nd gear selector fork
7. 1st/2nd selector shaft
~ CAUTION: T w o t y p e s of s e l e c t o r s h a f t
/ j \ a s s e m b l i e s h a v e been fitted. T y p e A
s e l e c t o r s are m a n u f a c t u r e d f r o m cast
steel w h i l s t t y p e B are m a n u f a c t u r e d f r o m
a l u m i n i u m b r o n z e a n d are g o l d i n c o l o u r .
Do not i n t e r c h a n g e selector f o r k s o r s h a f t s
between t y p e A a n d B a s s e m b l i e s .
4. Slide 5th/reverse gear selector off 5th/reverse
selector shaft.
5. Slide 3rd/4th and 5th selector forks off
5th/reverse selector shaft.
1. Identify each selector fork and its fitted position
to the relevant selector shaft. Slide 1st/2nd
gear selector fork off 1st/2nd selector shaft.
2. Slide 1st/2nd selector shaft out of 5th gear
selector fork and 5th/reverse gear selector.
3. Using a suitable punch, remove roll pin
securing 5th/reverse gear selector; discard roll
pin.
OVERHAUL 1 1