Lotus Elise S1 Service Notes page 203

ENGINE
12M3505
20. Fit rear timing belt backplate, tit and tighten
bolts to:
M5 bolts • 6 Nm
M6 bolts -10 Nm.
12M3506A
12M3507
24. Check that timing slots in front and rear VVC
control sleeves are visible through holes in
camshaft carrier.
CAUTION: If timing slots are not visible,
carry out following procedure.
A
25. Remove hydraulic control unit.
21 * Ensure that hydraulic control piston is pushed
fully to top of bore and that rack teeth will be
aligned to control shaft when control unit is
fitted.
22. Position hydraulic control unit and seal plate to
camshaft carrier, engage teeth of rack with
those of control shaft.
23. Fit and lightly tighten 3 bolts.
^ ^ b b h h h h h h h h b h b b m b i
OVERHAUL