Lotus Elise S1 Service Notes page 496

Section XA
XA.5 - HAND HELD FIRE EXTINGUISHER - A111T0002S
Recommended Fitting Instructions
It is recommended that this extinguisher is mounted ahead of the passenger seat, fixed to the cockpit
floor crossmember as detailed below:
1. Mark the positions of the two fixing holes in the crossmember as shown in the diagram.
2.
Drill the two holes 9.0 mm diameter through only the top surface of the crossmember.
3. Insert the two Rivnuts and use an M6 threaded puller tool, or appropriate M6 slave screws to crimp the
two Rivnuts into position.
4. Fit the extinguisher mounting bracket using the two countersunk M6 screws provided, and clip in the
extinguisher.
Chassis side rail
Extrusion overlap edge
Drill both holes
9 mm diameter
Page 14