Lotus Elise S1 Service Notes page 444

}
1
Lotus Service Notes Section PF
7. The distribution control cable runs from the upper selector lever to the bottom of the flap spindle on RHD
cars, and to the top of the flap spindle on LHD cars:
RHD cars: Access to the distribution flap lever is available from within the passenger footwell. With the
selector lever at defrost, the flap spindle should be turned fully clockwise when viewed from beneath, and
the cable hooked into the middle hole in the lever. Position the lever on the spindle and clamp the outer
cable to allow full flap movement to be obtained.
RHD viewed from beneath
Distribution
control cable
Distribution flap
lever
Spring clip
Footwell
outlet vent
I3E
LHD cars: The cable connects to the top end of the flap spindle, with access improved by the removal of
the wiper mechanism. With the selector lever at defrost, the flap spindle should be turned fully clockwise
and the cable hooked into the hole nearest the spindle. Position the lever on the spindle and clamp the
outer cable to allow full flap movement to be obtained.
LHD - within front services compartment
Spring clip
Distribution control cable
Connection to scuttle
demist duct
Distribution flap lever