Lotus Elise S1 Service Notes page 202

ENGINE
13. Fit 32 bolts noting that 4 longest bolts are fitted
at each end of camshaft carrier.
14. Using sequence shown, progressively tighten
bolts to 10 Nm.
15. Remove timing plates 18G 1770/1 - front and
18G 1770/2 - rear.
12M3504
16.
17.
Fit and tighten new bolts - front and rear VVC
housings to camshaft carrier to 10 Nm.
Fit and tighten new bolts - VVC housings to
cylinder head to 10 Nm.
A
NOTE: Camshaft front oil seal illustrated.
18. Position oil seal protector 18G 1749 over end
of camshaft and fit new exhaust camshaft front
and rear oil seals using tool 18G 1769A .
A
NOTE: Front oil seals are coloured
BLACK, rear oil seals are coloured RED.
~ CAUTION: Oil seals must be fitted dry. Do
/ } \ not use tool 18G 1769 for fitting seals as
they will not be positioned correctly within
recess.
18G 1604A
M12 7255
19. Fit new front and rear VVC housing oil seals
using tool 18G 1604A.
A
NOTE: Front oil seals are coloured
BLACK, rear oil seals are coloured RED.
~ CAUTION: Oil seals must be fitted dry. Do
/ ! \ not use tool 18G 1604 for fitting seals as
they will not be positioned correctly w i t h i n
recess.
OVERHAUL 6 5